Moisture Detection in Frisco, TX
Water hiding in your walls, floors, or ceiling? Our IICRC-certified team finds it with thermal cameras and moisture meters, then shows you exactly where it is and what to do next.
IICRC Certified | 60-Minute Response | 24/7 Live Dispatch | Direct Insurance Billing
What Is Moisture Detection?
Some water damage is easy to see. A lot of it is not. A small leak inside a wall, under a floor, or above a ceiling can stay hidden for weeks. By the time you smell mold or see a stain, the damage has often spread.
Moisture detection is a careful check of your property to find water you cannot see. It tells you three things:
This matters because drying and repairs only work when you know the full size of the problem. Guessing can leave wet spots behind, and wet spots turn into mold.
Signs You May Have Hidden Moisture
Call us if you notice any of these. Even one sign is worth a check, and a quick inspection now can save you a much bigger repair later.
How We Find Hidden Water
We do not rely on one tool. Each tool has limits, so we use them together and check one against the other.
1. Visual walk-through
We start by looking and asking questions. What happened? When? Where does it smell? Your answers tell us where to look first.
2. Thermal (infrared) camera
It shows temperature differences on a surface. Wet materials are often cooler, so it helps us spot suspicious areas fast. A thermal camera does not measure water by itself, so we always confirm with a moisture meter.
3. Pinless moisture meter
It scans the surface without making holes. It is good for quick checks across walls and floors.
4. Pin moisture meter
It reads moisture in one exact spot, giving a more precise number when we need to confirm a reading.
5. Humidity and air readings
We measure the humidity and temperature of the air. High humidity can point to a wet area nearby and helps us choose the right drying equipment.
6. Moisture map and photos
We record what we find and mark the wet areas so you can see the full picture. This map is the starting point for the drying plan.
What You Get From Us
Not sure if you have a hidden leak?
Call us any time, day or night. A real person answers and sends a technician. If the moisture is small or already dry, we will tell you honestly. Not every visit needs a big job.
Why Moisture Problems Are Common in Frisco
Frisco homes deal with a few local conditions that make hidden moisture more likely:
Frisco Neighborhoods We Serve
We work across Frisco, so we know what homes in each area tend to deal with.
Common Places We Find Hidden Moisture
| Area of the property | Usual cause |
|---|---|
| Behind kitchen cabinets and under sinks | Slow supply line or drain leaks |
| Around dishwashers, fridges, and washers | Loose or worn hoses |
| Behind bathroom walls and under tubs | Failed seals or shower pan leaks |
| Ceilings below upstairs bathrooms | Toilet or tub leaks above |
| Ceilings and attic edges | Roof or flashing leaks after storms |
| Slab floors | Pipe leaks under the foundation |
| Around AC units and closets | Clogged or cracked drain lines |
| Exterior walls and windows | Poor sealing, rain getting in |
Why Speed Matters, and How Our Process Works
The U.S. Environmental Protection Agency advises drying wet materials within 24 to 48 hours to help stop mold from growing. Wet drywall, insulation, and subfloor also get weaker the longer they stay wet. The earlier we find the moisture, the smaller the repair. Acting fast often means drying a wall instead of replacing it.
Step 1: You call
A real person answers, listens, and sends a technician.
Step 2: We arrive
We aim to be at your Frisco property within 60 minutes.
Step 3: We inspect
We walk the property, then scan and test for moisture.
Step 4: We explain
We show you what we found in plain words and give you the report.
Step 5: We recommend
If drying is needed, we plan it using industry standards. If not, we tell you.
Step 6: We check again
After drying, we test again to confirm the materials are back to normal.
Who Is Behind This Service
WDR Frisco TX is a locally based restoration team that has helped Frisco homes and businesses for more than 10 years. Our office is at 10750 John W. Elliott Dr, Frisco, TX 75033.
Last updated: September 2026. Written by the WDR Frisco TX restoration team.
Is Moisture Detection Covered by Insurance?
It can be. Many policies cover the cost of finding the source of a sudden leak or storm damage as part of a claim. Coverage depends on your policy and the cause of the water, so check with your agent.
We give you photos, readings, and a written report that support your claim, and we can talk with your adjuster directly.
Moisture Detection FAQs
How long does a moisture inspection take?
Most homes take about one to two hours. Small areas can be faster. Larger properties or several rooms take longer.
Will you cut into my walls?
Usually not. Thermal cameras and pinless meters let us scan without opening anything. If a reading looks serious, we may make a very small hole to confirm it, and we will ask you first.
Can a thermal camera see through walls?
No. It shows temperature differences on the surface. Wet areas are often cooler, which gives us a clue. We then use moisture meters to confirm whether water is really there.
Do I need to move furniture?
Not usually. We may ask you to clear a small area so we can reach a wall or floor.
How much does moisture detection cost in Frisco?
Our on-site damage assessment is free. If we find a problem, we explain the next steps and the cost before any work starts.
How do I know the leak is really fixed?
After the source is repaired and the area is dried, we take new readings. When they match normal dry levels for that material, we tell you it is safe to close up or rebuild.
What is a normal moisture level?
It depends on the material. Drywall and wood have different safe ranges. We compare the wet area against a dry area of the same material in your home, which gives us a fair baseline.
Do you also handle the repair?
Yes. If drying or repairs are needed, we can do that too, so you do not have to look for another company.
Schedule Your Moisture Inspection in Frisco
Do not wait for a small leak to become a big repair. Call any time, day or night.
Email: info@wdrfriscotx.com | Office: 10750 John W. Elliott Dr, Frisco, TX 75033